PYNQ-Z2 Overlays

The PYNQ-Z2 board has the following features:

• Zynq XC7Z020-1CLG400C

• 512MB DDR3

• 1G Ethernet

• USB 2.0

• MicroSD

• Uart

• ADAU1761 Audio Codec with 3.5mm HP/Mic and line-in jacks

• 2x HDMI (can be used as input or output)

• 4 push-buttons

• 2 slide switches

• 4 LEDs

• 2 RGB LEDs

• 2x Pmod ports

• 1x Arduino header

• 1x RaspberryPi header

Note that 8 pins of the RaspberryPi header are shared with one of the Pmod ports.

For details on the PYNQ-Z2 board including reference manual, schematics, constraints file (xdc), see the PYNQ-Z2 webpage

The following overlays are include by default in the PYNQ image for the PYNQ-Z2 board:

• Base Overlay
• Logictools Overlay

Other third party overlays may also be available for this board. See the PYNQ community webpage for details of third party overlays and other resources.